Cylinder Head Bolts.
£2.57
14-0241
Add to Cart
View Cart
|
Primary Cover Domed Nut.
£2.20
21-0544
[Order]
[Checkout]
|
Spindle Chrome Nut.
£1.85
21-0550
Add to Cart
View Cart
|
Base Barrel Nut Set Stainless
£57.86
Stainless 12 point Barrel Base nut set.
[Order]
[Checkout]
|
Barrel Nut 12 point.
£2.53
21-0692
Add to Cart
View Cart
|
Barrel Nut 6-point.
£1.10
21-2117
Add to Cart
View Cart
|
Rotor Nut.
£2.53
21-2182
Add to Cart
View Cart
|
Head Stud Nuts.
£4.73
21-2204
Add to Cart
View Cart
|
Socket Nut 5/16" Cylinder Head Stud
£4.95
Socket Nut for 5/16" central cylinder Head Stud
[Order]
[Checkout]
|
Socket Nut Set Stainless
£26.18
This Stainless set is effective and retains cosmetic integrity in a gruelling high temperature environment.
[Order]
[Checkout]
|
Rocker Box Shouldered bolt
£3.87
Rocker Box Shouldered bolt
[Order]
[Checkout]
|
Stainless Rocker Box Shoulder Bolt Set
£45.00
Stainless Rocker Bolt Set,machined to so that bolt is perfectly removable to check Cylinder Head Torque settings (use head torque tool SC32)
[Order]
[Checkout]
|
Rotor Fan Washer.
£1.00
21-7024
Add to Cart
View Cart
|
Oil Pump Morgo Rotary.
£194.78
339
Add to Cart
View Cart
|
Tab Washer Set.
£3.76
388
Add to Cart
View Cart
|
Forged Pistons forT140.
£284.75
SC26A
FORGED PISTON KIT. To fit T140.Compression Ratio 9.5:1 Kit includes rings and clips.Using latest piston technology.STANDARD FEATURES:
Fully CNC Machined 2618 Alloy FORGINGS. ULTIMATE for Severest of Uses! "Micro Grooved" PISTON SKIRT. Longest Skirt Life with MUCH Better Resistance to Scuffing. "Gas Grooved" 2nd
ringland. Forced WristPin OILING for LESS Heat Buildup. Can be run with as little as .003" clearance. 3" Bore is Standard.
[Order]
[Checkout]
|
Dowel(Timing Side).
£1.37
57-0989
Add to Cart
View Cart
|
Rocker Spindle 'O'ring.
£0.60
60-3548
Add to Cart
View Cart
|
Oil Pressure Switch.Genuine style
£12.34
60-3719A
Genuine style oil pressure switch,this is the correct thread to fit directly into your existing original triumph timing cover.Beware of of other 'tapered' thread switches that can split your timing case.
Add to Cart
View Cart
|
Con Rod Nut.
£1.73
60-3761
Add to Cart
View Cart
|
Primary Chain.
£62.57
60-4125
Add to Cart
View Cart
|
Sprag Clutch
£108.00
Sprag clutch bearing T140 ES
[Order]
[Checkout]
|
Main Bearing Timing 3-piece Roller type.
£45.36
60-7362
Replace your Timing Side Ball Bearing with this 3 piece Roller Bearing from NSK.A must do if you wish to fit performance cams.
Add to Cart
View Cart
|
Valve Seal.
£1.60
60-7363
Add to Cart
View Cart
|
Main Bearing Drive
£49.85
68-0625
These RHP Bearings are manufactured in England to the highest quality and are the the correct (fitted) tolerence for your T140.
Add to Cart
View Cart
|
Oil Pump Drive Block.
£6.07
70-0495
Add to Cart
View Cart
|
Spindle Copper Washer.
£0.33
70-1335
Add to Cart
View Cart
|
Dowel(Tappet Feed).
£0.98
70-1532
Add to Cart
View Cart
|
Timing Pinion Key.
£1.66
70-1558
Add to Cart
View Cart
|
Rocker Shim Springs.
£1.23
70-1574
Add to Cart
View Cart
|
Rocker Shims.
£0.70
70-1575
Add to Cart
View Cart
|
Guide Block Screw Washer.
£0.20
70-2441
Add to Cart
View Cart
|
Valve.
£19.43
70-2904
Exhaust&Inlet valve.T140 Hi-spec grade 214N Pulsed Plasma Nitrided & Tuftrided.Fits T140 & T120 Bonnevilles.
Add to Cart
View Cart
|
Valve Guide Clip.'E'.
£0.45
70-3209
Add to Cart
View Cart
|
Big End Shells.(.010-.040).
£27.09
70-3586
Add to Cart
View Cart
|
Crank Sludge Tube.
£6.88
70-3903
Add to Cart
View Cart
|
Patent Plate with Rivets.
£7.57
70-4016
Add to Cart
View Cart
|
Timing Cover Seals.
£3.18
70-4568
Add to Cart
View Cart
|
Timing Cover Seal Clip.
£1.08
70-4569
Add to Cart
View Cart
|
Primary Tension Blade.
£13.55
70-5085
Add to Cart
View Cart
|
Guide Block 'O'ring.
£0.58
70-7563
Add to Cart
View Cart
|
Dowel (Barrel Stud).
£0.98
70-8751
Add to Cart
View Cart
|
Tappet Exhaust.
£37.55
70-8801
Add to Cart
View Cart
|
Crankcase Filter.
£17.49
70-9336
Add to Cart
View Cart
|
Tappet Guide Blocks.
£24.41
70-9352/3/'79 on 71-7194
Made in England superb quality.
Add to Cart
View Cart
|
Oil Pump 2-Valve.
£62.95
70-9421
Add to Cart
View Cart
|
Cylinder Head Repair Stub
£31.00 £29.50 On Sale!
Stainless Cylinder Head exhaust stub tapered to ensure gas tight fit when threads on the exhaust port are worn.
[Order]
[Checkout]
|
Con Rod Bolt.
£7.88
70-9914
Add to Cart
View Cart
|
Rotor Key.
£1.94
71-0082
Add to Cart
View Cart
|
Camshaft Bush (Large).
£7.72
71-0286
Add to Cart
View Cart
|
Camshaft Bush(Small).
£6.42
71-0287
Add to Cart
View Cart
|
Push Rod Tube Sleeves.
£1.60
71-1707
Please state year of machine and engine/frame no.
Add to Cart
View Cart
|
Crankshaft.
£462.00
71-2425
Out of stock.
Add to Cart
View Cart
|
Crank Sludge Plug.
£6.35
71-2800
With Hexagon insert for ease of removal.
Add to Cart
View Cart
|
Oil Pressure swith rubber boot
£2.45
Made in England using original tooling.
|
Con Rod .
£175.00
71-3006
Add to Cart
View Cart
|
Valve Guides.
£16.28
71-3294/5
Superb quality Alpha Guides Made in England
Add to Cart
View Cart
|
Push Rod Tube Alloy
£27.50
71-3329/7191
Add to Cart
View Cart
|
Push Rod Tube
£22.31
71-3329/7191
Made in England to original drawings with deep chrome finish.
Add to Cart
View Cart
|
Push Rod.
£7.57
71-3330
Made in England to correct tolerence from original specifications.Avoid problems with loose fitting end caps.Fit the best.
Add to Cart
View Cart
|
Ultimate Oil pressure Release Valve
£41.48
71-3447U
CNC Manufactured to highest spec from billet stainless steel.This will restore correct pressure to the oil system (60lb/sq in) ,compliments morgo rotary pumps and can aid crankcase oil level and pressure.
Add to Cart
View Cart
|
Engine Sprocket.
£36.75
71-3542
Add to Cart
View Cart
|
Rocker Spindle.
£27.30
71-3549
Add to Cart
View Cart
|
Rocker Oil Feed.
£27.75
71-3550
Rocker Oil Feed .Made in Britain .Superior plating with machine flats for a perfect seal.
Add to Cart
View Cart
|
Head Nut Bridge Plate.
£1.60
71-3553
Add to Cart
View Cart
|
Timing Pinion.
£33.86
71-3666
Add to Cart
View Cart
|
Rocker Box.
£130.20
71-3669
Add to Cart
View Cart
|
Rocker Box Lid.
£6.88
71-3671
Add to Cart
View Cart
|
Head Gasket (Copper).
£11.22
71-3681
Made in England OE Copper Head Gasket.Re torque head once engine has been run after fotting your new Head gasket.
Add to Cart
View Cart
|
Piston Set (Complete).
£92.35
71-3686
Low expansion Silicon alloy complete with rings and pins
Add to Cart
View Cart
|
Piston Circlips.
£0.58
71-3700
Add to Cart
View Cart
|
Valve Collet
£1.58
71-3748
Add to Cart
View Cart
|
Billet Primary Inspection plug
£5.95
Beautiful Billet Alumonium Primary inspection plug (CNC machined in England)
[Order]
[Checkout]
|
Dowel (Front Engine Mount).
£2.63
71-3989
Add to Cart
View Cart
|
Cylinder Barrel.
£275.00
71-4005
Made in England .The barrel's have exhaust tappet guide-block oilways suitable for all 750cc T140's from '73 onwards.
Add to Cart
View Cart
|
Head Gasket (Composite).
£11.50
71-4619
Add to Cart
View Cart
|
Inlet Tappet
£33.20
Made in England to original drawings with stellite tip
[Order]
[Checkout]
|
Primary Gasket.
£5.20
71-7009
ASBESTOS FREE and the correct thickness to ensure gearchsnge lever does not foul the Primary Chaincase cover.
Add to Cart
View Cart
|
Camshaft.Inlet
£77.70
71-7016
Add to Cart
View Cart
|
'Spitfire' Exhaust Camshaft
£145.00
71-7017R
The 'spitfire' cam is a repro of the E3134 profile.It was found during testing for the T140 that 3134 cams caused timing side bearing failure, so they fitted a shorter duration police 'saint' cam which shifted the power band away from mid range.These days we fit 3 piece timing side roller bearings so you can get back the original 'bonnie' power band with the 'spitfire' cam.
Add to Cart
View Cart
|
Timing Cover.
£114.71
71-7042
Add to Cart
View Cart
|
Rocker Arm
£24.10
71-7043/44
Add to Cart
View Cart
|
Rocker Adjusters .
£1.91
71-7045
Add to Cart
View Cart
|
Oil Pump 4-Valve.
£79.75
71-7317
Add to Cart
View Cart
|
Piston Ring Set.
£35.22
99-3789
Add to Cart
View Cart
|
Hepolite Piston Ring Set STD only
£45.00
OE Rings fitted to T140 STD ONLY .One set per piston.
[Order]
[Checkout]
|
Gasket Set 'Decoke'.
£24.68
99-7001
Add to Cart
View Cart
|
Gasket Set with'O'rings.
£39.75
99-7002
All the engine and Gear box gaskets including timing cover ,inner gearbox & timing cover.All 'O' rings including geabox & primary inspection cover.The most comprehensive kit made from top quality materials (Composite Head Gasket)inc.
Add to Cart
View Cart
|
Valve Spring Set.
£22.05
99-7037
Add to Cart
View Cart
|
Mushroom Headed Tappet Adjusters
£23.37
BVT 11
Add to Cart
View Cart
|
Megacycle 'Street' Camshafts
£315.00
Leave the plastic ones gasping at the 'lights',no changes needed to engine same followers same pistons.Power is increased low to mid range (5000rpm)
[Order]
[Checkout]
|
Morgo Oil pump
£111.00
Morgo Unit High Performance Plunger Pump .
[Order]
[Checkout]
|
T140 'Push in 'exhaust seal kit(Back in stock)
£68.25
PI1
Put an end to those 'push in pipe' problems .This kit comes complete with tap and drill as well as a jig to ensure a perfect fit.Easy to follow instructions will ensure your machine sounds perfect and runs efficiently.Fitting time 2hours.
Add to Cart
View Cart
|
Push in exhaust kit spare olive
£5.00
Changing 'pipes over? Spare sealing ring/olive
[Order]
[Checkout]
|
Stainles Allen Bolt Set.(Three Covers).
£20.48
SC25
Add to Cart
View Cart
|
Allen Set.Stainless(Rocker Boxes)
£13.13
SC26
Add to Cart
View Cart
|
Forged 7075-alloy connecting rods.
£341.25
SC26
Heat Treated with keyed alloy caps and high tensile bolts threaded into rod.Employs the latest US stock car racing technology.
Add to Cart
View Cart
|
Engine Oil Seal Set.
£15.89
SC27
Add to Cart
View Cart
|
Piston&Block Set.
£325.50
SC42
Add to Cart
View Cart
|
Oil Cooler Top End Kit
£94.50 £84.50 On Sale!
This T140 Oil Cooler replaces your rocker oil feed pipe with a fully finned billet manifold .It looks great and keeps your oil cool too!
[Order]
[Checkout]
|
Head Fin Rubber.
£0.36
SC71
Add to Cart
View Cart
|
Bonneville "Bunn" Breather kit
£89.00
The 2010 Bunn Breather is the only motorcycle crankcase breather designed to actively pump out accumulating moisture and sump water. This makes it perhaps the ideal motorcycle breather for its time, given the march of ethanol fuels.UPDATE:"The kit has been 'uprated' so the air filter was replaced with the more compact nylon filter housing
The Bunn Classic Breather Kit manages the crankcase pressure and airflow.It stops pressure swings,cuts oil leaks and power loss.The breather is designed to do three things: cut crankcase air pressure and oil leaks, actively pump blow-by vapour from the engine, and reduce power losses due windage, oil drag. It is designed to assist engine function creating more efficiency and increased power .
[Order]
[Checkout]
|
Oil Pressure Gauge
£68.38
The gauge fits in 15 minutes (T140's tickover at 20lbs and 60-80lbs normal running)The kit is complete with all fittings Oil Pressure Gauge set comprises of a universal mounting bracket made in die cast aluminium, coated with a hard wearing black finish. The custom made clock reads from 0 to 100 psi. The clock bezel and body are made from stainless steel. The rear of the clock is finished with a push on rubber cover.
[Order]
[Checkout]
|
Nikasil Plated 750cc Cylinder Barrel
£756.00
Add to Cart
View Cart
|
Aluminium Tappet Guide Block
£57.75
For use with Aluminium Barrel Assembly
Add to Cart
View Cart
|
70-3059 "R" 1 1/8 in. radius tappet
£42.00
"R" 1 1/8 in. radius tappets for use with performance camshafts
[Order]
[Checkout]
|
